explain xkcd - User contributions [en]

2880: Sheet Bend

2024-01-13T11:52:37Z

198.41.236.207: /* Explanation */

{{comic
| number = 2880
| date = January 12, 2024
| title = Sheet Bend
| image = sheet_bend_2x.png
| imagesize = 317x244px
| noexpand = true
| titletext = A left-handed sheet bend creates a much weaker connection, especially under moderate loads.
}}

==Explanation==
{{incomplete|Created by a SHEETTY BEND - Please change this comment when editing this page. Can anyone elaborate on of this knot is right handed and what the differnces to a left handed would be and why this would decrease the strength of the knot as mentioned in the title text. Do NOT delete this tag too soon.}}
This is the seventh installment in the series of [[:Category:Cursed Connectors|Cursed Connectors]] and presents Cursed Connectors #46: The Sheet Bend. At the time of release this was the lowest number used for a cursed connector, with #286: [[2507: USV-C]] being the one with the highest number after those seven comics.

This comic shows two double-core wires being joined to make an electrical connection. Instead of the join being made the conventional way, that is, silver being joined to silver and gold being joined to gold within the insulating white cable, the diagram shows each core being connected to a ductile outer sheath, then the wires being tied together such that the outer sheaths touch and the connection is completed that way. This is not the way electrical connections are usually made, as you might get an electric shock from touching the outer side of the wires.

If this knot were tightened, the gold and silver connectors would probably touch, shorting out the circuit.

The knot used to tie the two halves of the cable is a {{w|sheet bend}}, which is often used to join two ropes of different thicknesses, and explains the name for this type of cursed connector.

The title text says that a left handed sheet bend would provide a weaker connection. An actual left handed sheet bend provides less strength to the knot. This makes the title text a pun on the double meaning of "moderate load" (as in a moderate amount of weight or a moderate amount of electricity). The difference between a left handed and right handed sheet knot is the free ends of the knots are on the same side in a right handed sheet knot (here both on the bottom side), but on opposite sides in a left handed sheet knot.

==Transcript==
:[Above the drawing there is a header. Below the header there is a double-core wire going in from the left and stopping just past the middle of the picture. It shows how the inside of the wire looks and how the silver and golden wires inside are connected to two rectangular pieces of silver and golden material respectively. The golden piece is to the left and the silver piece to the right, closest to the end of the wire. Beneath this wire is shown two double-core wires forming a knot of the sheet bend type. Here it becomes clear that the silver and golden pieces are on the outside of the wires (but connected to the wires running inside the wires). In the knotted part of the wires gold touches gold and silver touches silver, without them touching the other color. Beneath this knot there is label for the connector.]
:Cursed Connectors #46:
:The Sheet Bend

{{comic discussion}}

[[Category:Cursed Connectors]]
[[Category:Comics with color]]

Talk:2880: Sheet Bend

2024-01-13T11:46:34Z

198.41.236.207:

Why is this called a "sheet" bend? [[User:SystemParadox|SystemParadox]] ([[User talk:SystemParadox|talk]]) 21:17, 12 January 2024 (UTC)
:I don't know the full answer but it's a sailing thing: the 'sheet' is the rope you pull in or let out to control the position of the sail. I guess bend describes the category of knot. [[Special:Contributions/172.70.90.48|172.70.90.48]] 21:23, 12 January 2024 (UTC)
::NO NO NO. The sheet is the sail. [[User:JohnB|JohnB]] ([[User talk:JohnB|talk]]) 21:36, 12 January 2024 (UTC)
:::It is the rope - {{w|Sheet (sailing)}}. "In sailing, a sheet is a line (rope, cable or chain) used to control the movable corner(s) (clews) of a sail." [[Special:Contributions/172.71.242.5|172.71.242.5]] 21:56, 12 January 2024 (UTC)
::::Huh. Dueling Wikipedia articles. The Sheet_bend article has a definition section that says the term "sheet bend" derives from its use bending ropes to sails (sheets). But the Sheet_(sailing) article says a sheet is a line used to control the movable corner(s) of a sail. [[User:JohnB|JohnB]] ([[User talk:JohnB|talk]]) 23:08, 12 January 2024 (UTC)
::The sheet bend is named for its ability to to secure a sail, or sheet. You fold over the corner of the sail and that's one of your "ropes". The sheet bend is generally used as a knot for tying a large, inflexible rope (or rope-like object) to a smaller, more flexible rope.[[Special:Contributions/172.69.70.22|172.69.70.22]] 22:30, 12 January 2024 (UTC)
::I would take the Ashley Book of Knots as authoritative. Sheet Bend is the first knot in the book, and is always (in modern terms) rope-to-rope, not to sail. It is one of the basic knots. https://en.wikipedia.org/wiki/The_Ashley_Book_of_Knots https://en.wikipedia.org/wiki/Sheet_bend
::{{unsigned|PRR|04:04, 13 January 2024}} 
:I added a link to the wikipedia entry, it explains the name. [[User:Barmar|Barmar]] ([[User talk:Barmar|talk]]) 21:25, 12 January 2024 (UTC)
:Presumably the "different loads" title text is a pun between electrical load and mechanical stress on the knot? [[User:Jim-at-home|Jim-at-home]] ([[User talk:Jim-at-home|talk]]) 21:56, 12 January 2024 (UTC)

“silver being joined to silver and gold being joined to gold within the insulating white cable” is not the conventional way to join cables.
Unless you are joining one cable to itself (like a Möbius strip), you have ''two'' cables with insulation.
And usually you use non-cursed connectors, where you first remove the insulation at the end of the cable and then crimp or solder the conductors to metal parts of the connector; or solder the conductors and then add a different type of insulation for protection; or use screw terminals;...
Only with insulation displacement connectors you keep using all the insulation of the two cables.
And finally, conductors are usually copper ''or'' aluminum, and very rarely silver ''and'' gold. --[[Special:Contributions/162.158.94.141|162.158.94.141]] 08:45, 13 January 2024 (UTC)
:I think the gold and silver is just color coded for the reader. Not that they are meant to indicate that the conductors are made from this material. Apart from that you comment sounds like you know what you are talking about. So please improve the explanation if you can. --[[User:Kynde|Kynde]] ([[User talk:Kynde|talk]]) 10:58, 13 January 2024 (UTC)

Okay I looked at the wikipedia article and the knot depicted in the comic looks like a right handed one. I still don't know why it's called right handed, or why the left handed one is insecure.[[Special:Contributions/198.41.236.207|198.41.236.207]] 11:46, 13 January 2024 (UTC)

2856: Materials Scientists

2023-11-18T03:32:09Z

198.41.236.207: Transcription

{{comic
| number = 2856
| date = November 17, 2023
| title = Materials Scientists
| image = materials_scientists_2x.png
| imagesize = 296x445px
| noexpand = true
| titletext = If a materials scientist gives you a present, always ask whether regifting will incur any requirements for Federal paperwork.
}}

==Explanation==
{{incomplete|Created by a BOT - Please change this comment when editing this page. Do NOT delete this tag too soon.}}

==Transcript==
{{incomplete transcript|Do NOT delete this tag too soon.}}

:[Ponytail, White Hat and Cueball are standing around a table of gifts, with Cueball holding one.]
:Cueball: Where is this wrapping paper from? It's so thin, but I can't tear it. Is this amarid fabric?!
:Cueball: Maybe I can unpeel the... oooh, the tape flashes as I pull it up! Triboluminescence! Did you add a phosphor? It's so bright!
:Cueball: Wait, are these patterns structural coloration?

:[Caption below the panel:]
:Materials scientists are like cats - the best present you can get them is an empty box with cool wrapping paper.

{{comic discussion}}