Editing Talk:2322: ISO Paper Size Golden Spiral

<!--Please sign your posts with ~~~~ and don't delete this text. New comments should be added at the bottom.-->

It annoys me that the hover text says 11/8.5 = pi/4, when 8.5/11≈0.77272727272 and pi/4≈0.78539816339. Claiming 8.5/11 equals pi/4 would be a much more beleiveable lie. [[Special:Contributions/162.158.79.37|162.158.79.37]] 15:29, 19 June 2020 (UTC)
:The title text has since corrected this error![[Special:Contributions/108.162.219.170|108.162.219.170]] 07:14, 25 June 2020 (UTC)

The explanation says that the A series "side lengths shrink by a factor of the square root of two" but that's not true.  The width of A(n+1) is half the length of A(n) as depicted.  The sqrt(2) ratio referenced is between the length and width of any one piece of paper.[[Special:Contributions/172.69.62.124|172.69.62.124]] 15:35, 19 June 2020 (UTC)
:The side lengths do shrink by a factor of sqrt(2): the width of A(n) is sqrt(2) times the width of A(n+1), the length of A(n) is sqrt(2) times the length of A(n+1). Your statement that "the width of A(n+1) is half the length of A(n)" is also true, but it does not contradict that each step in the A-series shrinks the sides by a factor of sqrt(2). [[User:Zmatt|Zmatt]] ([[User talk:Zmatt|talk]]) 16:09, 19 June 2020 (UTC)

Fixed it [[Special:Contributions/162.158.74.61|162.158.74.61]] 15:43, 19 June 2020 (UTC)

Hi ! How come 11/8.5 = Pi/4 ? First one is more thant 1, second one is less than one... Although Pi/4 and 8.5/11 (or the reverse) are pretty similar, as usual in "let's annoy mathematicians" Randall's style...

I think y’all just got nerd sniped by Randall’s title text.

https://xkcd.com/spiral/ --[[Special:Contributions/188.114.103.233|188.114.103.233]] 17:22, 19 June 2020 (UTC)

I understand why it annoys mathematicians (it's not the golden ratio), but why does it annoy graphics designers?  Please add explanation!
::I suspect that what would annoy many (if not most) graphic designers (especially Americans) is the claim that the ISO standard for paper sizes (which is very rarely used in the US) is inherently and objectively beautiful, along with the implication that everyone should switch to using the international standard. 
::The usual graphic for this is vertical and has the paper sizes getting smaller going towards the top left corner, not positioned in a spiral.
::More scientifically-minded designers would be just as annoyed as (most) mathematicians are by the persistent myth that there is something inherently beautiful about the "golden ratio" in the first place, but unfortunately they are probably not in the majority.[[Special:Contributions/172.69.50.76|172.69.50.76]] 17:50, 21 June 2020 (UTC)
::I'm a graphic designer, and this doesn't annoy me. Perhaps because I'm not particularly fond of the golden ratio. I can only speak for myself. [[User:BleepBox|BleepBox]] ([[User talk:BleepBox|talk]]) 15:32, 30 June 2020 (UTC)
:::Also a graphic designer. Doesn't annoy me either. Maybe if you're really obsessed with paper size standards, it might annoy you, but most graphic design work doesn't even follow ISO paper sizes, even outside the US (most of the time you're either working with whatever arbitrary size the printing house demands, or you're given the freedom to determine your own arbitrary size). [[Special:Contributions/172.69.3.195|172.69.3.195]] 23:50, 23 March 2023 (UTC) 

It should be noted that the logarithmic spiral this comic implies it is would actually go outside the bounds of the paper. The leftmost point of the spiral would be about 6.4mm to the left of the left edge of the A1 sheet. [[User:Zmatt|Zmatt]] ([[User talk:Zmatt|talk]]) 18:39, 19 June 2020 (UTC)
:This drawing (as opposed to the singular mathematical formula behind the idealised spiral for the partitioning used) basically takes a simple quarter-oval across each distinct sheet size (with, as essentially mentioned elsewhere, the root(2) ratio between sides) alternating x/y and y/x as major and minor axes respectively. Even if it is not obviously discontinuous (x and y inflection transitions occur subtly) any derivative of the curve (as polar, say) would show jumps in gradient at each stage - probably an inclined-stepped/saw-toothy pattern whereas the true logarithmic line would demonstrate itself as a continuous function at any such level of derivation. The true spiral line followed from origin outwards would ''almost'' (not quite, because of the polar gradient) hit the 'outer edge' first in line with the ultimately recursive centre-point then withdraw again to hit the next transition slightly 'inward' of the next level out. The Golden Spiral approximation uses squares for each quarter, which therefore does not switch major and minor axes, but still changes the curve <!-- (stepped, but 'flat' treads between the abrupt risers) --> and thus has the same not-quite-Golden nature. Although it's hard to describe, as you can see from my poor attempt that's probably inadvertently fallen foul of more specialised Pure Mathematics terminology due to the Pedant's Curse... ;) [[Special:Contributions/162.158.155.240|162.158.155.240]] 22:23, 19 June 2020 (UTC)

Mathematicians get annoyed by the claim that the golden ratio is everywhere.  I love Disney's "Donald in Mathmagic Land" but they make some outrageous claims about the golden ratio's place in art and architecture.  BTW, the ISO system of paper sizes is awesome!  You can photocopy two A4 pages side-by-side, reduced to fit exactly on a single A4 page.
:Also they get pi wrong. --[[Special:Contributions/162.158.79.209|162.158.79.209]] 22:18, 20 June 2020 (UTC)

: I think you mean that half of A4 is A3 ;o) [[Special:Contributions/108.162.249.248|108.162.249.248]] 05:02, 24 June 2020 (UTC)

Isn't grade closer to degrees than to radians? [[User:Djbrasier|Djbrasier]] ([[User talk:Djbrasier|talk]]) 15:03, 20 June 2020 (UTC)
:It's two different things. The "[https://en.wikipedia.org/wiki/Grade_(slope) grade]" of a slope is just the rise divided by the run, commonly expressed as a precentage. It is not an angle measure but the tangent of an angle measure. It is commonly used in North America for surveying and engineering purposes. "[https://en.wikipedia.org/wiki/Gradian Gradian]" is a badly named angle measurement that, worse, is often referred to informally as "grade" from "centigrade".It is an angle measure, though a useless one: ten-ninths of the measure in degrees. The gradian is commonly used for surveying and engineering in some parts of Europe. The text in the current explanation confuses them, which is common due to the bad naming of the second measure. [[Special:Contributions/162.158.187.197|162.158.187.197]] 16:45, 20 June 2020 (UTC)

A friend of mine, attempting to do graphic design, once created an approximate golden spiral using the boxes diagram with quarter circles. He then laboriously produced a logo by making copies of the spiral and using pieces of it for each curve. I then informed him that all the curves in his image were just circular segments. [[Special:Contributions/172.69.69.44|172.69.69.44]] 16:36, 20 June 2020 (UTC)

[[Special:Contributions/108.162.216.216|108.162.216.216]] 15:21, 23 June 2020 (UTC)

The reason ISO paper sizes use an aspect ratio equal to the square root of two is that makes enlarging or reducing in copiers work better.  With the US sizes, when you enlarge or reduce to the next standard size up or down, you have to choose between cutting off part of your original or leaving some blank space, because US standard paper sizes aren't the same shape.

[[Special:Contributions/108.162.216.216|108.162.216.216]] 15:21, 23 June 2020 (UTC)

: I never knew this, but it is no surprise. :P [[Special:Contributions/108.162.249.248|108.162.249.248]] 05:03, 24 June 2020 (UTC)